HONY specialist in the machining of plastic, standard, technical or high performance parts
HONY Engineering Plastics Co.,Ltd is a specialist in the machining of plastic, standard, technical or high performance parts for over 10 years on many materials. We also do milling and turning. We take care of machining according to plans, files or models. ISO 9001 certified.
MACHINING OF PLASTIC PARTS IN GENERAL
In general, there are two main families:
Thermoplastics (plastics) which include standard, technical and high performance materials
Thermosets (laminates or composites) which are resin-based materials with glass, cotton, paper, wood ...
We have classified the materials into four families according to their uses and mechanical performance:
Standards for current applications without specific specifications
the optical qualities of PMMA
HDPE slip
the chemical resistance of PP
the ease of use of PVC
Techniques where the intrinsic characteristics of the material meet very precise specifications
polyamide (PA), also called nylon, which is one of the best known of this range for its mechanical characteristics goes everywhere and available in many variations
polycarbonate (PC), unbreakable
polyacetal (POM), elastic with "shape memory"
polyethylene terephthalate (PETP), very good wear behavior ...
Laminates for the purpose of electrically or thermally insulating
Epoxy glass fabric (FR-4; G11; G10 ..) Epoxy resin reinforced with glass fabric
Polyester glass mat (Delmat epoxy) Polyester resin reinforced with glass fibers
Phenolic cotton (Bakelised canvas) Phenolic resin reinforced with a cotton fabric.
High performance when operating temperatures exceed 150 ° C and can reach 500 ° C
PTFE (Teflon) which is no longer present, which is resistant to over 200 ° C and chemicals
PEEK, dimensionally stable, with many variants including food and self-lubricating
PBI (Celazole) a peak use temperature of 500 ° C
Leave a comments